Home | News | Search
View in

EMC Equipment

A wide range of equipment is required in order to be able to ensure devices are manufactured to, and that sites comply with, EMC Standards. EMCS and National EMC Calibration offer validation and calibration services as appropriate for a large selection of equipment including ESD Generators, Absorbing Clamps, Current Probes, and Signal Generators.

Electrostatic Discharge (ESD) Generators

ESD generators can be verified in accordance with IEC 61000-4-2 (2009). The rise time, peak current, and, current at 30 ns and current at 60 ns can be verified at 2 kV, 4 kV, 6 kV and 8 kV voltage settings in addition to air discharge voltage measurements.

Absorbing Clamps

The insertion loss can be calibrated and the impedance verified in accordance with CISPR 16-1-3 (2004) for absorbing clamps used for disturbance power measurements from 30 MHz to 300 MHz.

Current Probes

The transfer impedance can be calibrated for current probes used for conducted emission testing from 150 kHz to 30 MHz.

Signal Generator

Frequency, level frequency response, and linearity of signal generators up to 26.5 GHz can be calibrated.